SPECS for BCX ULTRA PHOTON & E-FIELD BEAM TUBES
BCX Ultra Raytubes (handheld tubes)
Operate at a 45 hz carrier frequency
Can be modulated 1 to 45 hz with any wave form (square, sine, etc.)
Variable Intensity to 100,000Hz
Power: 30 watts maximum
Cost: free w BCX Ultra unit
Vortex Unit (includes tube, works with the Ultra):
Operates at a 45 hz carrier frequency
Can be modulated 1 to 45hz with any wave form (square, sine, etc.)
Variable Intensity
Power: 48 watts maximum
Cost: $1195.00
NEW BEAM TUBES
** 3 new models connects to BCX Ultra
1. BT-EFG (Beam Tube- Electric Field Generator)
Generates Plasma discharge and Electric Field
Operating frequency: 1 to 666 Hz.
Wave Form: No intensity variation (squarewave only).
Power: 125 millijoules/pulse (83 watts @ 666 Hz.)
Tube Type: Double-Bubble or Phanatron beam tube
Availability: Now
Cost: $2995
2. BT-PCM (Beam Tube- Plasma Carrier Modulator)
Operates with a 100khz carrier frequency
Operating frequency: Can be modulated 1 to 100khz
Wave Form: (square, sine, etc.)Variable Intensity
Power: 96 watts maximum
Tube Type: Double-Bubble or Phanatron beam tube
Cost: $2100
3. BT-HF EFG (Beam Tube- High Frequency Electric Field Generator)
Generates Plasma discharge and Electric Field Field Field
Operating frequency: 1 to 3.3 MHz
Wave Form: Squarewave only, Variable Intensity
Power: PRELIMINARY-125 microjoules/pulse (412 watts @ 3.30 MHz) Tube Type: Double-Bubble or Phanatron beam
tube
Cost: TBD
CHOICE of 2 Models of Beam Tubes for the above 3 BT control boxes:
1. BT-PDB (Beam Tube- Plasma Double Bubble)
2. BT-PPH (Beam Tube- Plasma Phanatron)
STANDARD LED WANDS: cost $90.00
Color
Wave nanometrer Lum Intens. milcand Beam Wdth degrees Focal Plane inches Lumens
LED Fwd
Volts
LED Fwd
Current millamps TTL
Power milliwatts EfficiencyLum/Watt
Red 640 24,000 20 1.7 2.3 1.9 30 342 6.74
Blue 467 21,600 10 2.15 1.33 2.7 30 486 2.73
Green 520 108,000 20 1.7 10.37 3.2 30 576 18.00
1. Wavelength for colored colored LED's ranges from long (infrared), to short (ultraviolet). White is a mixture of colors
centered around a middle (color temperature).
2. Luminous Intensity is the most accurate indicator of LIGHT INTENSITY.
3. Beam width and Focal plane define the distance from the light source where the light is most even.
4. Luminous flux takes into account the area over which the light at a given intensity is spread, and is the best
representation of the QUANTITY OF LIGHT emitted.
5. Power in watts is a poor representation of the light output. It actually only shows the electrical consumption of the
device. For example, a 100 watt incandescent light bulb puts out the same amount of light as a 20 watt Compact
Fluorescent bulb (CFL).
HIGH POWERED (HP) LED WANDS:
SPECS on the NEW Ultra High Power LED wands:
Ultra High Power LED Wand Model HW530A (Green):
Wavelength 530 nm
Intensity 435 Lumens
Ultra High Power LED Wand Model HW626A (Red):
Wavelength 626 nm
Intensity 255 Lumens
Ultra High Power LED Wand Model HW470A (Blue):
Wavelength 470 nm
Intensity 174 Lumens
Ultra HP LED Wands output roughly 40 times that of the standard Ultra LED wands and pulse at 1mhz, 1.25mhz, and
1.67mhz. The standard LED wand won't pulse above 100khz.
COST $ 262.00
--------------------------------------------------------------------------------
WHY BCX ULTRA?
Wide Range of Wave Types including our exclusive Square 'Pulse' Wave
Wide Range of Apparatuses/Electrodes both included and optional (see what is new & upcoming).
Our Hand-held Ray Beam Tube
Any Software Upgrades, just send in your unit to get the latest & greatest. Future option will be through your computer.
Radio Carrier Wave & Gating Wave
Amplifier & Frequency Generator are both built-in to our BCX Ultra unit
Exciting New Apparatuses coming soon that will connect with the BCX Ultra (see what is new & upcoming).
BCX Ultra Raytubes (handheld tubes)
Operate at a 45 hz carrier frequency
Can be modulated 1 to 45 hz with any wave form (square, sine, etc.)
Variable Intensity to 100,000Hz
Power: 30 watts maximum
Cost: free w BCX Ultra unit
Vortex Unit (includes tube, works with the Ultra):
Operates at a 45 hz carrier frequency
Can be modulated 1 to 45hz with any wave form (square, sine, etc.)
Variable Intensity
Power: 48 watts maximum
Cost: $1195.00
NEW BEAM TUBES
** 3 new models connects to BCX Ultra
1. BT-EFG (Beam Tube- Electric Field Generator)
Generates Plasma discharge and Electric Field
Operating frequency: 1 to 666 Hz.
Wave Form: No intensity variation (squarewave only).
Power: 125 millijoules/pulse (83 watts @ 666 Hz.)
Tube Type: Double-Bubble or Phanatron beam tube
Availability: Now
Cost: $2995
2. BT-PCM (Beam Tube- Plasma Carrier Modulator)
Operates with a 100khz carrier frequency
Operating frequency: Can be modulated 1 to 100khz
Wave Form: (square, sine, etc.)Variable Intensity
Power: 96 watts maximum
Tube Type: Double-Bubble or Phanatron beam tube
Cost: $2100
3. BT-HF EFG (Beam Tube- High Frequency Electric Field Generator)
Generates Plasma discharge and Electric Field Field Field
Operating frequency: 1 to 3.3 MHz
Wave Form: Squarewave only, Variable Intensity
Power: PRELIMINARY-125 microjoules/pulse (412 watts @ 3.30 MHz) Tube Type: Double-Bubble or Phanatron beam
tube
Cost: TBD
CHOICE of 2 Models of Beam Tubes for the above 3 BT control boxes:
1. BT-PDB (Beam Tube- Plasma Double Bubble)
2. BT-PPH (Beam Tube- Plasma Phanatron)
STANDARD LED WANDS: cost $90.00
Color
Wave nanometrer Lum Intens. milcand Beam Wdth degrees Focal Plane inches Lumens
LED Fwd
Volts
LED Fwd
Current millamps TTL
Power milliwatts EfficiencyLum/Watt
Red 640 24,000 20 1.7 2.3 1.9 30 342 6.74
Blue 467 21,600 10 2.15 1.33 2.7 30 486 2.73
Green 520 108,000 20 1.7 10.37 3.2 30 576 18.00
1. Wavelength for colored colored LED's ranges from long (infrared), to short (ultraviolet). White is a mixture of colors
centered around a middle (color temperature).
2. Luminous Intensity is the most accurate indicator of LIGHT INTENSITY.
3. Beam width and Focal plane define the distance from the light source where the light is most even.
4. Luminous flux takes into account the area over which the light at a given intensity is spread, and is the best
representation of the QUANTITY OF LIGHT emitted.
5. Power in watts is a poor representation of the light output. It actually only shows the electrical consumption of the
device. For example, a 100 watt incandescent light bulb puts out the same amount of light as a 20 watt Compact
Fluorescent bulb (CFL).
HIGH POWERED (HP) LED WANDS:
SPECS on the NEW Ultra High Power LED wands:
Ultra High Power LED Wand Model HW530A (Green):
Wavelength 530 nm
Intensity 435 Lumens
Ultra High Power LED Wand Model HW626A (Red):
Wavelength 626 nm
Intensity 255 Lumens
Ultra High Power LED Wand Model HW470A (Blue):
Wavelength 470 nm
Intensity 174 Lumens
Ultra HP LED Wands output roughly 40 times that of the standard Ultra LED wands and pulse at 1mhz, 1.25mhz, and
1.67mhz. The standard LED wand won't pulse above 100khz.
COST $ 262.00
--------------------------------------------------------------------------------
WHY BCX ULTRA?
Wide Range of Wave Types including our exclusive Square 'Pulse' Wave
Wide Range of Apparatuses/Electrodes both included and optional (see what is new & upcoming).
Our Hand-held Ray Beam Tube
Any Software Upgrades, just send in your unit to get the latest & greatest. Future option will be through your computer.
Radio Carrier Wave & Gating Wave
Amplifier & Frequency Generator are both built-in to our BCX Ultra unit
Exciting New Apparatuses coming soon that will connect with the BCX Ultra (see what is new & upcoming).
WHY WE USE LED WANDS
L.E.D.’s
Our L.E.D.’s are now available in three colors: red, green and blue. They can be applied in a variety of ways
including: on the eyes, in the navel, and on the skin.
Application on the eyes
The green and red L.E.D.’s are applied alternately (green one day, red the next day, then green the following day,
etc.). Hold the L.E.D. 1/4th inch away from an open eye, or directly on the lid of a closed eye. Start with 1 minute
per frequency for each eye, working up to 5 minutes per frequency for each eye. This can be done twice a day.
Application in the navel
Red L.E.D.’s are applied directly in the navel to stimulate regeneration, for tonification and blood cleansing.
Application on the skin
Green L.E.D.’s are applied directly on the affected area of the skin for mutated cells and tumors. They can also be
applied on acupuncture points.
Blue L.E.D.’s are used for SARS, and are applied directly on the affected area.
FREQUENCIES for L.E.D.’s
All frequencies are applicable for use with L.E.D.’s.
**Brain cell/tissue repair…………………………………………………2128
Endorphin Stimulation for pain relief and relaxation…………………..2.5
Eyesight, to improve…………………………………… see frequency manual
*Mutated cells, to shrink abnormal growth……..……………………… 17024
Pain and inflammation, irritation………………………………………….1, 123
Seratonin stimulation for pain relief…………………………………….2.5+80
Tissue repair………………………………………………………………..266
* This frequency is to be used 3 minutes in combination with 1 Hz. for 7 minutes, and 266 Hz. for 5 minutes.
** This frequency is to be used 3 minutes in combination with 1 Hz. for 7 minutes, and 123 Hz. for 5 minutes.
TECHNICAL SPECS: for detailed information click here
L.E.D.’s
Our L.E.D.’s are now available in three colors: red, green and blue. They can be applied in a variety of ways
including: on the eyes, in the navel, and on the skin.
Application on the eyes
The green and red L.E.D.’s are applied alternately (green one day, red the next day, then green the following day,
etc.). Hold the L.E.D. 1/4th inch away from an open eye, or directly on the lid of a closed eye. Start with 1 minute
per frequency for each eye, working up to 5 minutes per frequency for each eye. This can be done twice a day.
Application in the navel
Red L.E.D.’s are applied directly in the navel to stimulate regeneration, for tonification and blood cleansing.
Application on the skin
Green L.E.D.’s are applied directly on the affected area of the skin for mutated cells and tumors. They can also be
applied on acupuncture points.
Blue L.E.D.’s are used for SARS, and are applied directly on the affected area.
FREQUENCIES for L.E.D.’s
All frequencies are applicable for use with L.E.D.’s.
**Brain cell/tissue repair…………………………………………………2128
Endorphin Stimulation for pain relief and relaxation…………………..2.5
Eyesight, to improve…………………………………… see frequency manual
*Mutated cells, to shrink abnormal growth……..……………………… 17024
Pain and inflammation, irritation………………………………………….1, 123
Seratonin stimulation for pain relief…………………………………….2.5+80
Tissue repair………………………………………………………………..266
* This frequency is to be used 3 minutes in combination with 1 Hz. for 7 minutes, and 266 Hz. for 5 minutes.
** This frequency is to be used 3 minutes in combination with 1 Hz. for 7 minutes, and 123 Hz. for 5 minutes.
TECHNICAL SPECS: for detailed information click here
BT-HF PCM (Beam Tube- Plasma Carrier
Modulator)
Generates Plasma discharge and minor Electric Field
Operating frequency: 1Hz to 4 MHz
Wave Form: (square, sine, etc.) Variable Intensity
Power: 125 microjoules/pulse (96 watts @ 4.00 MHz)
Tube Type: Phanatron Tube
Addtl HW: connects to BCX Ultra
Cost: $2675.00
OUR MOST powerful out put to date
combined with BCX $4495.00
to add extra std. hand-held accessories $400
Modulator)
Generates Plasma discharge and minor Electric Field
Operating frequency: 1Hz to 4 MHz
Wave Form: (square, sine, etc.) Variable Intensity
Power: 125 microjoules/pulse (96 watts @ 4.00 MHz)
Tube Type: Phanatron Tube
Addtl HW: connects to BCX Ultra
Cost: $2675.00
OUR MOST powerful out put to date
combined with BCX $4495.00
to add extra std. hand-held accessories $400